Temperature screening solutions

FEVER SCREENING WITH FACE RECOGNITION TERMINAL

  • Plug & play rapid deployment. Free of wiring, installation, or configuration.
  • Supports Vanadium Oxide uncooled sensor to measure target’s temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration
  • Recognition distance: 0.3 to 2 m
  • Fast temperature measurement mode: Detects face and takes body temperature without identity authentication
  • Multiple authentication modes with temperature measure are available
  • Face mask wearing alert, if the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
  • Forced mask wearing alert, if the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will fail.
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting fever
  • Configurable door status (open/close) when detecting fever
  • Transmits online and offline temperature information to the client software via
  • TCP/IP communication and saves the data on the client software
  • Integrated design with table top stand (floor standing or panel mounting also available)

HUMAN TEMPERATURE SCREENING & METAL WALK-THROUGH DETECTOR

  • Temperature exception detection
  • Metal detection with location indication
  • Linkage for audible alarm
  • Uncooled sensor, resolution: 160 x 120
  • Supports dual-light fusion image
  • Supports visible light and thermal imaging frame over lay
  • IP66 protective level
  • Detection accuracy: metal in the size like a clip (or 1/2 clip) is detectable on the middle of the detector. Goods like Belt buckle can be excluded. Copper, aluminium, and zinc (over 150 g) , controlled knife, and gun are detectable
  • Multi-area alarm: Indicates the metal position on the body. Max. 18 areas

HUMAN TEMPERATURE SCREENING HAND HELD THERMAL CAMERA. STAND -ALONE USAGE, 2 METERS WORKING RANGE

  • Thermal imaging Body temperature measurement
  • 320 × 240 resolution 2.4’’ LCD display
  • Hardware interface: micro USB
  • 1 to 2.5 meters working distance (Optimum working distance 1 – 2 meters)
  • Support on-board video recording: replaceable card (max 128gb)
  • High sensitivity thermal module with 160 x 120 resolution
  • Temperature range: 30°C to 45°C; temperature accuracy: ±0.5 °C
  • Dismountable and rechargeable Li-ion Battery
  • Critical positioning height 1.5 meters

HUMAN TEMPERATURE SCREENING HAND HELD, THERMAL CAMERA WITH WIFI, 3 METERS RANGE

  • Thermal/Optical/Fusion image/Picture in picture
  • 640 × 480 resolution 3.5’’ LCD touch display
  • WiFi built-in for wire free operation
  • 1 to 3 meters working distance (Optimum working distance 1.5 – 2 meters)
  • Support on-board video recording
  • High sensitivity thermal module with 160 x 120 resolution
  • Temperature range: 30°C to 45°C; temperature accuracy: ±0.5 °C
  • Dismountable and rechargeable Li-ion Battery
  • Critical positioning height 1.5 meters

HUMAN TEMPERATURE SCREENING THERMAL BULLET CAMERA, 6MM LENS, 9 METERS RANGE

  • 6mm Thermal, 8mm optical lens (the most popular lens option for Fever solution)
  • 1.5 to 9 meters working distance (Optimum working distance 5 – 7 meters)
  • Twin lens camera, Thermal and optical output
  • High sensitivity thermal module with 384 x 288 pixel resolution
  • Temperature range: 30°C to 45°C; temperature accuracy: ±0.5 °C
  • Audio & Visual alarm output
  • Critical positioning height 1.5 meters
  • Supports Micro SD card (up to 256gb)
  • Suitable for use with 77xx-I series NVR
  • To use in conjunction with Face recognition use iDS-77xx series NVR

HUMAN TEMPERATURE SCREENING THERMAL BULLET CAMERA. 6MM LENS, 3 METERS RANGE

  • 6mm Thermal, 8mm optical lens (the most popular lens option for Fever solution)
  • 1 to 3 meters working distance (Optimum working distance 1.5 – 2 meters)
  • Twin lens camera, Thermal and optical output
  • High sensitivity thermal module with 160 x 120 resolution
  • Temperature range: 30°C to 45°C; temperature accuracy: ±0.5 °C
  • Audio & Visual alarm output
  • Critical positioning height 1.5 meters
  • Supports Micro SD card (up to 256gb)
  • Suitable for use with 77xx-I series NVR
  • To use in conjunction with Face recognition use iDS-77xx series NVR

HUMAN TEMPERATURE SCREENING THERMAL TURRET CAMERA, 6MM LENS, 3 METERS RANGE

  • 6mm Thermal, 8mm optical lens (most popular lens option for Fever solution)
  • 1 to 3 meters working distance (Optimum working distance 1.5 – 2 meters)
  • Twin lens camera, Thermal and optical output
  • High sensitivity thermal module with 160 x 120 resolution
  • Temperature range: 30°C to 45°C; temperature accuracy: ±0.5 °C
  • Audio & Visual alarm output
  • Critical positioning height 1.5 meters
  • Supports Micro SD card (up to 256gb)
  • Suitable for use with 77xx-I series NVR
  • To use in conjunction with Face recognition use iDS-77xx series NVR

HUMAN TEMPERATURE SCREENING WITH FACE RECOGNITION AND PROX READER, ACCESS CONTROL TERMINAL

  • Plug & play rapid deployment. Free of wiring, installation, or configuration.
  • Supports Vanadium Oxide uncooled sensor to measure target’s temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration
  • Recognition distance: 0.3 to 2 m
  • Fast temperature measurement mode: Detects face and takes body temperature without identity authentication
  • Multiple authentication modes with temperature measure are available
  • Face mask wearing alert, if the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
  • Forced mask wearing alert, if the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will fail.
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Wall mounting, floor standing using floor stand DS-KAB671-B (not included)

THERMAL CAMERA CALIBRATION BLACK BOX

  • Increases the camera reading accuracy from ± 0.5 °C to ± 0.3 °C
  • Works in real-time in the cameras field of view
  • Must be deployed with the camera, while the camera is working mode
  • Supports different temperature settings
  • High accuracy and good stability
  • Easy temperature calibration and correction
  • Strong ability of anti-interference
  • Compact size: 120 mm × 103 mm × 170 mm
  • Mount on a desktop or a tripod

TEMPERATURE SCREENING SOLUTIONS: KEEP YOUR WORKFORCE SAFE AGAINST COVID 19

Our lives have changed since the beginning of 2020,  news of Covid 19 first broke and virtually the whole world went into lockdown. Here in the UK all our thoughts went into protecting our NHS and all of our wonderful keyworkers . We missed loved ones and normal everyday activities. Work and education stopped.

MOVING OUT OF LOCKDOWN.

Thankfully the lockdown has lifted for most of us and the country is slowly starting to recover.

New measures that are now in place to keep us,  our families and our workforce safe.

  • Masks are now mandatory in enclosed spaces
  • Thermal imaging cameras are being used for instance in airports, train stations, offices and retail outlets.

SYMPTOMS OF COVID

One of the main symptoms of covid is a rise in our body temperature. The bodies normal safe temperature is about 37C (98.6F). A high temperature is usually considered to be 38C or over. That’s why it’s a great idea to have systems in place to monitor customers temperatures. Below gives information on HIKVISIONS temperature screening solutions.

THERMAL TECHNOLOGY

Using infrared technology,  thermal cameras detect heat from a body. Normally from the forehead, and then it estimates the core body temperature. These cameras are an extremely powerful tool, they are often used by firefighters to track smouldering embers and police to search for out-of-sight suspects.

As lockdowns eases, thermal imaging cameras are popping up in all sorts of public places to assess people’s health for example in schools. offices, care homes and hospitals.

TEMPERATURE SCREENING SOLUTIONS

Temperature screening systems are already being used across a wide range of industries, including enterprise head offices, construction sites, government buildings, meat processing plants, nursing homes, food and drug distribution centres and retail stores. Making their usage a big part of an organisation’s strategy for returning employees to work.

However, before any organisation makes a decision about implementing this screening technology, it’s worth being clear about what it can and cannot do.

THERMAL SCREENING CAMERAS CAN:

  • Detect surface skin temperature on a non-contact basis, reducing risk
  • Indicate if that detected temperature falls outside of the pre-configured range, providing a first line of screening for a facility
  • Screen a high volume of people in a short time frame
  • Provide an audit trail of steps taken to assist with health, safety and welfare compliance

THERMAL SCREENING CAMERAS CAN’T:

  • Detect coronavirus
  • Detect a fever.

HOW THERMAL SCREENING CAMERAS WORK

The cameras contain advanced detectors and algorithms.  Temperature Screening Thermographic Cameras are designed to detect elevated skin-surface temperatures. Therefore can be used for fast and preliminary temperature screening. they provide an accurate result up to ±0.3°C.

Utilising thermal and conventional lenses and sensors, they can provide automatic alerts when anyone passing the camera exhibits a temperature in excess of a pre-configured range.

Thermal screening solutions allow:

  • One second to detect skin-surface temperature of a person
  • Multi-person detection simultaneously
  • Non-contact measurement to avoid physical contact
  • Immediately alarming to notify operators

OTHER THINGS TO CONSIDER WHEN THINKING OF INSTALLING TEMPERATURE SCREENING SOLUTIONS.

  • Completion of consent forms for staff
  • A policy for screening visitors to the facility
  • Who will monitor the screening? Will they need special conflict management training?
  • Will visitors be asked to leave or to undergo further clinical screening?
  • Will a specific facility be required for this further screening or for personnel feeling unwell?

In conclusion temperature screening solutions are the way forward in our ever changing world.

Menu